Cách xử lý lỗi báo đang tìm kiếm trên iphone 4, 4s và mọi dòng iphone

i recently got my phone changed khổng lồ orange in colour both front & back.. Getting it back i had lớn restore it. Connected it to iTunes and attempted the restore but failed. Once the loading bar under the táo icon on the iPhone was full while restoring, it came up as unable to lớn restore. Unknown error (-1). Does anybody know how i can fix this and how it happened?


1. Lớn fix error 1, you can restore your PC lớn an earlier time when the PC has not get the error 1.

Bạn đang xem: Cách xử lý lỗi báo đang tìm kiếm trên iphone 4, 4s và mọi dòng iphone

2. Use RecoveryTool.

How to Fix iPhone Error 1 While Restoring iPhone


*

*

*

SIMRAN I"ve this information from my iPhone 5 from the usb

Apple mobile Device (Recovery Mode):

Product ID: 0x1281

Vendor ID: 0x05ac (Apple Inc.)

Version: 0.00

Serial Number: CPID:8950 CPRV:20 CPFM:03 SCEP:10 BDID:02 ECID:0000032AB4084D29 IBFL:1B SRNM:

Speed: Up lớn 480 Mb/sec

Manufacturer: táo Inc.

Location ID: 0x26210000 / 5

Current Available (mA): 500

Current Required (mA): 500

Extra Operating Current (mA): 400

Is this fixable?

Got error 1 after i tried khổng lồ update...

thx for your reply


error code 1 is a modification code, I have only seen this code when a phone has been jailbroke & not for hardware mods, but I have had some bad luck with color conversion kits, they look real good & I have done this khổng lồ my I 4 but I have installed many that never worked right out of the box, I caution people on this thủ thuật as the parts are generic và a slight risk with your money, do I think the màu sắc Mod caused your problem ? I dont know, but I would reinstall the factory parts and see if that takes care of it.


This is a Hardware problem. When you remove the shield of Bottom side under the Charging jack. This is actually a problem of supply to Baseband cpu or either baseband is faulty. Beside the baseband chip there is a Golden crystal ic who supply the power khổng lồ baseband . Main this could be the reason .


hi I am having same problem with my iphone4 caused due to changing the toàn thân colour but I am having the serial no. Of my phone please help me to fix it thank you.....


this is not the reason of issue . During changing the parts you done something wrong to xúc tích và ngắn gọn board thats why it giving the error during restore. Take the ngắn gọn xúc tích board out from the phone & connect the good battery và charging jack then try lớn restore the phone without any other thing . Check out the error now . If same problem then it is a súc tích board issue otherwise something other part malfunctions .


no real solution for this problem i tried restore in dfu mode it works for some hours but the iphone again corrupted so the soultion is khổng lồ change your board ....for this reason change your iphone is a better solution


Error -1 is a baseband issue. The board needs to be repaired. You can buy the new components but it"s tricky to vì chưng without experience. It"s best to replace the baseband power ic first. If not solved then replace the baseband ic. It can be done with a heat gun but you will need a dentist type pick to remove the resin around the ic. There are a few vids on YouTube showing how it"s done.

Error 1 is different. I think Mitch rush is right. It only seems to happen lớn jail broken devices


I vị have the same problem (error 1) on my iPhone 5s.

I just wanna ask. What could be the cause of this error? bởi vì it have something to do with the interrupted update or over chargeing the unit? I thought error 1 is beseband problem to lớn it is something to bởi with the hardware. Thanks


5s error (-1).

Xem thêm: Hướng Dẫn Ráp Thuyền Điều Khiển Từ Xa Giá 950K, Hướng Dẫn Chế Cano Điều Khiển Siêu Tốc V1

I faced this problem once before as well, but got solved somehow.

Cant solve it anymore. Any suggestions?


©2022 fashionssories.com — Licensed under Creative Commons — Privacy — Terms — Accessibility